5
Remote Control
Installing the Batteries
Handling the Remote Control
1. Open the battery cover.
z
Slide back and remove the battery cover in
the direction of the arrow.
2. Installing the batteries.
z
Install two included Size AAA batteries
observing the correct pola,-).
Use the remote control within about 16 feet from front of the unit’s remote-
control sensor and within 30 degrees on both sides.
3. Close the battery cover.
z
Replace the battery cover in the direction
of the arrow and snap it back into place.
z
Do not mix new and old batteries together. The batteries could explode or
leak, resulting in fires, physical injury, or stains.
z
When inserting batteries, observe their correct polarities as marked on the
product. If inserted in the wrong direction, the batteries could explode or leak,
resulting in fires, physical injury, or stains.
ATTENTION
z
Do not drop the remote control.
z
To avoid possible failures, do not splash the remote control with water
or put it on a wet object.
z
If leaving the remote control out of use for an extended period of time,
remove the batteries from it.
z
If the remote control does not respond properly, replace the batteries.
z
Strong light such as direct sunlight exposed on the photoreceptor of
the remote control can cause operational failure. Position this unit to
avoid direct contact with such light.
Within 30 degrees
Within 30 degrees
About 10 feet
About 10 feet
About 16 feet
CAUTION
LED INDICATION
POWER ON/OFF
SLEEP
CH-LOCK
PIP
STILL
VOLUME UP / DN (
ST
)
MENU
PROGRAM / ADJUST (
X
)
DISPLAY
AV2
ENTER
AV1
RGB-1VGA
TV TUNER
SOURCE SELECT
ZOOM
CCD (Close Caption Display)
SWAP
CH UP / DN (
ST
)
MUTE
LAST-CH
SELECT (
ST
)
MTS
NUMBER KEYPAD
AV3
AV4
RGB-2 DVI
PROGRAM / ADJUST (
W
)
ASPECT
Component Names and Functions
continued
