Quick Start
3
Figure A.1
Figure A.2
Connector
Cover
To attach the MultiSync
®
LCD
1810
™
monitor to your system, follow
these instructions:
1. Turn off the power to your computer.
If you are using the supplied video signal cable, continue to step 2.
If you are using a BNC cable (not included), please skip to Step 3.
NOTE: BNC cables may be purchased at your local electronics store.
2. For the PC: Connect one end of the video signal cable to the back of the monitor
(Figure A.1)
and the other end to the connector of the display card in your system
(Figure A.2).
Tighten all screws. Proceed to Step 4.
78133813.wpc
10/28/99, 3:21 PM
5
