9
CUSTOM (Digital input and Resolution of 1600 x 1200 only):
Select one
of nine expansion rates. In this mode the resolution may be low and
there may be blank areas. This mode is for use with special video cards.
VIDEO DETECT:
Selects the method of video detection when more than one
computer is connected.
FIRST DETECT:
The video input has to be switched to “FIRST DETECT”
mode. When current video input signal is not present, then the monitor
searches for a video signal from the other video input port. If the video
signal is present in the other port, then the monitor switches the video
source input port to the new found video source automatically. The monitor
will not look for other video signals while the current video source is present.
LAST DETECT:
The video input has to be switched to the “LAST DETECT”
mode. When the monitor is displaying a signal from the current source
and a new secondary source is supplied to the monitor, then the monitor
will automatically switch to the new video source. When current video
input signal is not present, then the monitor searches for a video signal
from the other video input port. If the video signal is present in the other
port, then the monitor switches the video source input port to the new
found video source automatically.
NONE:
The Monitor will not search the other video input port unless the
monitor is turned on.
DVI SELECTION:
This function selects the DVI input mode (Input 1). When the DVI
selection has been changed, you must restart your computer.
AUTO
: By using the DVI-D to DVI-D cable, the DVI SELECTION is DIGITAL.
By using the D-SUB to DVI-A cable, the DVI SELECTION is ANALOG.
DIGITAL
: DVI digital input is available.
ANALOG
: DVI analog input is available.
NOTE
: For the MAC with digital output: before turning on the MAC, the DVI
Input mode must be set to DIGITAL in DVI SELECTION of OSM by
pressing SELECT button then CONTROL button when the DVI signal cable
is connected to the DVI-I connector (Input1) of the monitor. Otherwise the
MAC may not turn on.
NOTE
: Depending on the PC/Video card or video signal cable used, this
function may not operate.
OFF TIMER:
Monitor will automatically power-down when the end user has selected
a predetermined amount of time.
Tools 2
LANGUAGE:
OSM control menus are available in seven languages.
OSM LEFT/RIGHT:
You can choose where you would like the OSM control
image to appear on your screen. Selecting OSM Location allows you to
manually adjust the position of the OSM control menu left or right.
OSM DOWN/UP:
You can choose where you would like the OSM control
image to appear on your screen. Selecting OSM Location allows you to
manually adjust the position of the OSM control menu down or up.
Controls
–continued
LCD2180UXManual1020.p65
10/21/03, 9:10 AM
9
Содержание L213E9
Страница 1: ...MultiSync LCD2180UX TM ...
