10
OSM TURN OFF:
The OSM control menu will stay on as long as it is use. In the
OSM Turn Off submenu, you can select how long the monitor waits after the
last touch of a button to shut off the OSM control menu. The preset choices are 10-
120 seconds by 5 second increments.
OSM LOCK OUT:
This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while in the Lock Out
mode, a screen will appear indicating the OSM controls are locked out.
There are two types of OSM LOCK OUT: OSM LOCK OUT with BRIGHT-
NESS and CONTRAST control: To activate the OSM Lock Out function, press
SELECT, then “+” key and hold down simultaneously. To deactivate the OSM
Lock Out, press SELECT, then “+” key and hold down simultaneously.
BRIGHTNESS and CONTRAST can be adjusted while in the lock out mode.
OSM LOCK OUT with no control: To activate the OSM Lock Out function,
press SELECT, then “>” key and hold down simultaneously. To deactivate the
OSM Lock Out, press SELECT, then “>” key and hold down simultaneously.
No controls can be adjusted while in the lock out mode.
OSM ROTATION:
To rotate OSM between Landscape and Portrait modes.
RESOLUTION NOTIFIER:
This optimal resolution is 1600 x 1200. If ON is
selected, a message will appear on the screen after 30 seconds, notifying you
that the resolution is not at 1600 x 1200.
HOT KEY:
You can adjust the brightness and contrast directly. When this
function is set to ON, you can adjust the brightness with “<” or “>”, contrast
with + or – key, while the OSM menu is off.
FACTORY PRESET:
Selecting Factory Preset allows you to reset most OSM
control settings back to the factory settings. Individual settings can be reset by
highlighting the control to be reset and pressing the RESET button.
Information
DISPLAY MODE:
Provides information about the current resolution display and
technical data including the preset timing being used and the horizontal and
vertical frequencies. Increases or decreases the current resolution.
MONITOR INFO.:
Indicates the model and serial numbers of your monitor.
OSM Warning:
OSM Warning menus disappear with Exit button.
NO SIGNAL:
This function gives a warning when there is no Horizontal or
Vertical Sync. After power is turned on or when there is a change of input
signal, the
No Signal
window will appear.
RESOLUTION NOTIFIER:
This function gives a warning of use with optimized
resolution. After power is turned on or when there is a change of input
signal or the video signal doesn’t have proper resolution, the
Resolution
Notifier
window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE:
This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a
change of input signal or the video signal doesn’t have proper timing, the
Out Of Range
menu will appear.
NOTE:
If “ CHANGE DVI SELECTION” is displayed, switch to DVI SELECTION.
For advanced user menu see “Appendix”.
Controls
–continued
LCD2180UXManual1020.p65
10/21/03, 9:10 AM
10
Содержание L213E9
Страница 1: ...MultiSync LCD2180UX TM ...
