NEC IT3510, Руководство по эксплуатации

Страница: 9 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 3
1.2 Industry Canada Notification
Certification Number: 140 11281 A
Complies with: CP-01, Issue 8, Part I
Ringer Equivalence Number: 0.4
Connector: CA 11A
The Industry Canada label identifies certified equipment. The certification
means that the equipment meets certain telecommunications network
protective, operational, and safety requirements. The department does not
guarantee the equipment will operate to the user’s satisfaction.
Before installing the equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
In some cases, the company’s inside wiring associated with a single line
individual service may be extended by means of a certified connector
assembly (telephone extension cord). The customer should be aware that
compliance with the above conditions may not prevent degradation of service
in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or installations
made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request that the user disconnect the
equipment.
For their own protection, users should ensure that the electrical ground
connections of the power utility, telephone lines, and internal metallic water
pipe system, if present, are connected together. This protection may be
particularly important in rural areas.
A s an EN ER GY STAR ® partn er, N E C
C orp oration ha s d ete rm ined tha t th is
prod uct m e ets the E NE RG Y S TAR
®
gu ide line s for en ergy e fficien cy.
EN ER GY STAR ® is a U .S . reg istere d
m a rk.