NEC IT3510, Руководство по эксплуатации

Страница: 453 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 8 - 29
Streaky lines
appear on the
copies.
-OR-
The copies
appear shaded.
The document scanning
surface, or document pad is
dirty. Clean the scanned surface,
or the document pad.
Transparent documents, such
as OHP, are being copied. Place a blank sheet of white
paper on the document
during copying.
A very thin document with print
on both sides is being copied. Due to the thin paper’s
transparency, the back side
print may show. Reduce the
the density level and retry.
The periphery
of the copied
area is shaded.
The document pad is dirty. Clean the document pad.
The print paper selected is
larger than the origianl
document (when direct mode x
1.000 is used for copying). Manually select the same
sized paper as the original
document.
Use the appropriate scaling
factor to enlarge the
document being copied.
The document size and paper
direction are different (when
direct mode x 1.000 is used for
copying). Manually select the same
sized paper as the original
document.
Reset the paper in the same
direction as the original
document.
The appropriate reduction size
is not selected. Select the appropriate
reduction size to suit the
paper.
Copying (Continued)
Condition Cause Countermeasure