background image

User’s Manual  U16647EJ1V0UM

6

Terminology

The meanings of terms used in this manual are listed below.

Target device

The device that is targeted for emulation.

Target system

The system (user-built system) that is targeted for debugging. This

includes the target program and user-configured hardware.

On-chip debug

unit

Generic term of macros indicating RCU (run control unit), TEU (trigger

event unit), and TRCU (trace control unit).  It may be referred to as DCU

(debug control unit).

KEL connector

The following products provided by KEL Corporation.

8830E-026-170S (26-pin straight type)

8830E-026-170L (26-pin right-angle type)

MICTOR

connector

The following products provided by Tyco Electronic AMP K.K.

2-7670074-2 (38-pin straight type)

Related Documents

When using this manual, refer to the following manuals.

The related documents indicated in this publication may include preliminary versions.

However, preliminary versions are not marked as such.

{

Documents related to development tools (user’s manuals)

Document Name

Document

Number

IE-V850E1-CD-NW PCMCIA Card Type On-Chip Debug Emulator

This manual

Operation

U16053E

C Language

U16054E

CA850 Ver. 2.40 C Compiler Package

Assembly Language

U16042E

PM Plus Ver. 5.10

U16559E

ID850NWC Ver. 2.51 Integrated Debugger

Operation

To be prepared

Caution

The documents listed above are subject to change without notice.  Be

sure to use the latest documents when designing.

Содержание IE-V850E1-CD-NW

















































Отзывы: