NEC IE-789835-NS-EM1, Руководство пользователя

Страница: 17 / 47

CHAPTER 2 PART NAMES
User’s Manual U16290EJ1V0UM
17
2.2 Initial Switch and Jumper Settings
The initial switch and jumper settings of the IE-789835-NS-EM1 are shown in Table 2-1.
For the setting of JP2, refer to 3.4 Clock Settings .
For the settings of SW1 to SW6, refer to 3.6 LCD Emulation .
Table 2-1. Initial Switch and Jumper Settings
JP2
Initial setting 2 and 3 shorted
SW1 SW2 SW3 SW4 SW5 SW6
Initial setting OFF ICE side ICE side ICE side ICE side ICE side
2.3 Check Point Block
The through holes of the check point block (refer to Figure 2-1 IE-789835-NS-EM1 Part Names ) are provided at
intervals of 2.54 mm (1 inch) both vertically and horizontally, allowing confirmation of the signal of each port pin
inside the IE-789835-NS-EM1.
Figure 2-2. Check Point Block
Signals inside IE system
P00, P01, P02, P03, P04, P05, P06, P07
P10, P11, P60, P61, P62, N.C, N.C, N.C
P20, P21, P22, P23, P24, P25, P26, P27 Signals inside IE system
Signals inside IE system
Signals inside IE system
P80, P81, P82, P83, P84, P85, P86, P87
P30, P31, P32, P33, P34, P35, P36, P37
Caution Do not connect or capture the signal inside the IE system, or the IE system may be damaged.
Remark The through holes indicated by (N.C.) are not connected to any signal.