![background image](http://html.mh-extra.com/html/nec/hx4000/hx4000_user-manual_251339052.webp)
3-6
Setup
Powering On Your System
1. Make sure all external devices, such as a video
display, keyboard, and mouse (optional) have been
connected, and the power cords are connected.
2.
Power on the video display and any other external
devices.
3.
Press the ON/OFF button located on the rear
chassis above the AC input power connector to its
ON position. Refer to Figure 2-2, Rear Chassis
Features and Controls in Chapter 2 of this User's
Guide.
4. Press the DC push-button power on/off switch on the
front panel. Verify that the power-on LED is lit. If it
is not lit, ensure the ac power cords are connected to
a functional ac power source.
After a few seconds your system begins the internal
Power-On Self Tests (POST). POST automatically
checks the system board, CPU module, memory,
keyboard, and most installed peripheral devices.
If you have problems powering on your system, refer to
Problem Solving in Chapter 6 of this User’s Guide.
If you have optional adapter boards or devices to install
in your server, follow the procedures in the Upgrades
and Options chapter of this User's Guide. If you are
instructed to run the System Configuration Utility
(SCU), you will find the SCU diskette envelope in the
accessory box.
After you have successfully powered on your system,
refer to the EXPRESSBUILDER User’s Guide and run
the Installation Checklist Utility to confirm your
hardware setup is working correctly.
After you have successfully powered on your system,
refer to the Network Operating System Configuration
Guide for information on installing your operating
system.
Содержание HX4000
