1. Installing Internal Optional Devices
Express5800/T110i-S User’s Guide
55
Chapter 2 Preparations
For details of functions of each card, refer to the technical guide.
The card performance described in the parentheses after the Product name indicates the maximum operation performance of
the card.
Even if you use PCI cards of a higher performance than the PCI slot, the operation of the device will be that of the PCI slot.
About the standard network
You can use functional equivalents of AFT/SFT/ALB teaming and bonding with the standard network and the following LAN
cards:
N8104-150, N8104-151 and N8104-152
(1)
PCI slot limitations
See the table below for the limitations on installing PCI cards (due to the number of interrupts that can be
processed in the system) depending on the installed processor.
Processor
RAID controller required
PCI slot limitations
Pentium G4560
Xeon E3-1220v6
Xeon E3-1225v6
Yes
Up to two cards from the following can be installed.
N8103-184 SAS Controller (up to one)
N8104-152 Quad Port 1000BASE-T Adapter
No limitations for other cards.
No
Up to one card of N8103-184 SAS Controller can be installed.
No limitations for other cards.
Other processors
No limitations
(a) PCI slot limitations for VMware
Do not install N8104-152 Quad Port 1000BASE-T Adapter when any of the following cards is installed.
N8104-149 10GBASE SFP+ Adapter (SFP+/2ch)
N8104-157 10GBASE-T connection board (2ch)
The number of installable N8104-150/-151 is limited up to one.
For the configuration limitation for VMware ESXi, refer to the following documents.
VMware ESXi 6.0
https://www.vmware.com/pdf/vsphere6/r60/vsphere-60-configuration-maximums.pdf
VMware ESXi 6.5
Later
https://www.vmware.com/pdf/vsphere6/r65/vsphere-65-configuration-maximums.pdf
(b) PCI slot limitations for High Temperature Resistant kit
PCI cards listed below can be installed to PCI slot #4.
N8104-149 10GBASE SFP+ Adapter (SFP+/2ch)
N8104-157 10GBASE-T connection board (2ch)
N8103-184 SAS controller
N8103-142 SAS controller
N8104-152 1000BASE-T(4ch)
