NEC Express5800/R320d-M4 Series, Руководство пользователя

Страница: 84 / 98

1. Power ON
Chapter 3 Setup
6. When a built-in SAS controller is detected, a message will appear prompting for startup of SAS BIOS
setup utility. (If you wait for a few seconds, POST will go on automatically.)
Example:
Tips
• You need to start SAS BIOS Setup Utility only when you want change configuration of
built-in SAS controller. To launch utility, press
Ctrl
+
C
while the message appears on
screen.
• When utility is completed, the server will reboot itself automatically and perform POST.
• For details on the utility, refer to
Chapter 3 (3. SAS Configuration Utility)
in
Maintenance Guide
.
7. The screen shows the ID numbers of the connected disk drive.
8. The OS starts when POST is completed.
1.1.2
POST Error Messages
When POST detects an error, it displays an error message on the screen. For descriptions of error messages,
causes, and countermeasures, refer to
Chapter 1 (6.2. POST Error Message)
in
Maintenance Guide
.
Note
Take notes on the indication displayed on display unit before consulting with your sales
representative. Alarm messages are useful information for maintenance.
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 User's Guide
84