NEC Express5800/B120b, Руководство пользователя

Страница: 297 / 382

Upgrading Your Server 9-35
Procedure 1
1.
Shutdown the CPU blade system and turn off the power of the CPU blade.
2.
Replace the hard disk drive.
3.
Set up the system again.
IMPORTANT:
Because the data cannot be recovered in this
procedure, take the proper action such as data backup if necessary.
Procedure 2
1.
Delete all the volumes and partitions on the hard disk drive to be removed.
To delete volumes and partitions, select [Program] – [Administrative Tool] – [Disk
Management] in [Computer Management] from the [Start] menu.
Select [Delete volume]/[Delete partition] from the menu appearing by right-clicking on
volume/partition.
IMPORTANT:
„
Delete volumes and partitions carefully. Note that volumes and
partitions may not be deleted from a normal disk.
„
The volume and partition deletion disables the data to be recovered.
Take the proper action such as data backup if necessary.
2.
Shutdown the CPU blade system and turn off the power of the CPU blade.
3.
Remove the hard disk drive.
4.
Install the hard disk drive.
5.
Turn on the power of the CPU blade.
6.
Delete the removed disk.
To delete the disk, select [Program] – [Administrative Tool] – [Disk Management] in
[Computer Management] from the [Start] menu.
Right-click the removed disk in the [Disk Management] screen to select [Delete disk].
7.
Import the installed hard disk drive.
To import the disk, select [Program] – [Administrative Tool] – [Disk Management] in
[Computer Management] from the [Start] menu.
The installed disk has a different format. Right-click on the installed disk and select
[Import disk of different format].
8.
If NEC ESMPRO Agent is used, reset the hard disk drive (see "Reset of Hard Disk
Drive").