NEC Express5800/320Fa-L, Руководство пользователя

Страница: 340 / 406

7-34 Troubleshooting
Event ID: 209 - 213
Started maintenance operation without suspending (or stopping) HAS Fault
Tolerance service may be the reason for these logs to be recoded.
→
The following event logs may be recorded during the system operation, but there
is no problem in continue operating the system. However, there might be a
problem in OS or software environment if logs are recorded repeatedly. Contact
your maintenance service company.
Source: HAS Fault Tolerance
Type: Error
Event ID: 300
These logs report captured information when the program exception occur within
HAS Fault Tolerance service. The program exception occurs for various reasons, but
HAS Fault Tolerance service has allowance function that can handle the problem. It is
also set to self-recover even when exceeding the allowance range.
HasCtrl-related logs are recorded in the system event log:
→
The following event logs may be recorded during the system operation. This log
shows that CPU module is not in a dual mode. There is no problem to the system
by this warning, since CPU module will be set to a dual mode again.
Source: HasCtrl
Type: Warning
Event ID: 1202
Description: The driver failed the fast re-sync function of the CPU module
[Module[Module Number]]
[Module Number] “#0” or “#1”
Source: HasCtrl
Type: Warning
Event ID: 3500
Description: The error occurred on the CPU module of Module [Module
Number].
[Module Number] “#0” or “#1”
Source: HasCtrl
Type: Warning
Event ID: 4000
Description: The error occurred on the CPU module of Module [Module
Number].
[Module Number] “#0” or “#1”
Source: HasCtrl
Type Warning
Event ID: 4310
Description: Synchronization of the CPU module stopped.