NEC EXPRESS5800/120Re-2, Руководство по обслуживанию, Страница: 53 / 238

Setting Up the System 2-23
Installation Procedure C
1.
Attach the Arm Base to the rear of the power supply cage using the two
screws that secure the power supply cage to the chassis. See Figure 2-26.
Figure 2-26. Attaching the Arm Base
2.
Position the Arm Extension bracket as shown in the illustration below and
using two 6-32 screws attach the Arm Extension bracket to the Arm Base.
3.
One end of the cable arm includes a long hinged bracket with six mounting
holes. The other end of the cable arm includes a small hinged bracket with
two mounting holes. Using two 6-32 screws attach the end of the cable arm
with the long hinged bracket to the Arm Extension bracket. See Figure 2-27.
Arm Base
Arm Extension
Bracket
Cable
Arm
Two 6-32
screws
Two 6-32
screws
Figure 2-27. Attaching the Arm Extension Bracket to the Arm Base
Power Supply
Cage Screws (2)
Arm base