NEC ELECTRA ELITE IPK II, Руководство пользователя

Страница: 307 / 1190

Electra Elite IPK II Document Revision 4C
Department Calling 2 - 283

11-11-27 Service Code Setup (for Setup/Entry Operation) – Destination of Automatic Transfer for
Each Department Group
Set the service code (default: 604) for setting the destination for immediate automatic transfer
for ICM and transferred calls to Department Groups.

11-11-28 Service Code Setup (for Setup/Entry Operation) – Delayed Transfer for Every Extension
Group
Use this service code (default: 605) to set the delayed transfer destination Department Group.

11-11-29 Service Code Setup (for Setup/Entry Operation) – Delayed Transfer Cancellation for Each
Extension Group
Use this service code (default: 606) to cancel the delayed transfer destination Department
Group.

11-12-09 Service Code Setup (for Service Access) – Change to STG (Department Group) All Ring
Set the service code for ringing all members of a Department Group.

11-16-10 Single Digit Service Code Setup – (Department) STG All Ring Mode
Assign the Single Digit (post-dialing) Service Code for All Member Ring.

15-07-01 Programmable Function Keys
Assign a Department Calling key (46) so extension users can install or remove themselves from
the Department Calling Group. Additional keys can also be assigned for Department Group
features immediate calling destination (58), delayed calling destination (59) and DND
destination (60).

16-01-01 Department Group Basic Data Setup – Department Name
Assign a name to the Extension (Department) Groups.

16-01-02 Department Group Basic Data Setup – Department Calling Cycle
Set the routing cycle for calls to a department (i.e., when a user dials the department pilot
number). The system can ring the highest priority extension available, Priority Routing (0) or
cycle in circular order to a new idle extension for each new call, Circular Routing (1).

16-01-03 Department Group Basic Data Setup – Department Routing When Busy (Auto Step Call)
Set how the system routes an Intercom call to a busy Department Group member. The caller
can hear busy tone (0) or overflow to the first available Department Group member (1). This
option is for Intercom calls to an extension, not a pilot number.

16-01-04 Department Group Basic Data Setup – Hunting Mode
Set if an unanswered call should hunt once stopping at the last member tried (0) or continually
hunt through the idle members (1).

16-01-05 Department Group Basic Data Setup – Extension Group All Ring Mode Operation
Set if all members of the group should ring automatically (1) or through using the service code
(0) defined in Program 11-12-09. Selecting automatic overrides the settings of Programs
16-01-03 and 16-01-04.

16-01-06 Department Group Basic Data Setup – STG Withdraw Mode
0 = Disable (Camp On) (default)
1 = Enable (Overflow Mode)