9
C
o n f e r e n c e B r i d g e S e t u p
Before using the Multiline Conference Bridge feature, passwords must be assigned.
It should be noted that the supervisor should perform these procedures.
SETTING SUPERVISOR PASSWORD
➤
Call a Conference Bridge extension.
➤
When the Conference Bridge extension answers, dial the default Supervisor
Password (0000#).
➤
Follow the voice prompt and enter the setting verification mode. Then enter
setting change mode.
➤
Follow the voice prompt to change Supervisor Password (4-8 digits).
SETTING CONFERENCE 1 AND/OR CONFERENCE 2 PASSWORDS
➤
Set the Supervisor Password, if necessary.
➤
Call a Conference Bridge extension.
➤
When the Conference Bridge extension answers, dial the Supervisor Password
and
#.
➤
Skip the steps by pressing
*
until the Conference Setup mode is available for
conference 1 or conference 2.
➤
Follow the voice prompt and set the conference 1 or the conference 2
password (4-8 digits).
RECORD CUSTOMIZED GREETING
➤
Set the Supervisor Password, if necessary.
➤
Call a Conference Bridge extension.
➤
When the Conference Bridge extension answers, dial the Supervisor Password
and
#.
➤
Press
*
to skip the setting verification mode.
➤
Press
#
to change system settings.
➤
Skip the steps until Customized Greeting option is played.
➤
Follow the voice prompt and record a new Customized Greeting.
NECK002.Attendant/cover 04.04.01 02:37 PM Page 2
