48
NeoFace Access Control User's Guide
Chapter 1. Introduction
3.
Main Unit Description
3.2
Back of the Unit
(1) Connector for AC adapter (1 No) *1
Power supply connector for AC adapter.
Connected to the optional AC adapter of
NeoFace.
.
(5) Unused connector (1 No)
Cannot be used with NeoFace.
Do not connect anything.
(6) Display connector (DP) (1 No)
(2) Power source connector (1 No) *1
Connector compatible with display port standards.
Power supply connector for Terminal 2 Pin.
Connecting to display complaint to display port
standard is possible.
Can be connected to the power supply equipment.
(3) DI/DO connector (1 No)
(7) USB connector (2 Nos)
Connector compatible with Digital INPUT(DI) x4 / Digital
OUTPUT(DO) x4
Connector compatible with USB 3.0. Can be connected
to a USB device.
Can be connected to the devices compatible with contact
connection.
Lower side is USB 1 and upper side is USB 2.
(4) DI/DO switching switch (1 No)
(8) LAN connector (2 Nos)
Switch that switches between the internal power supply
(INT_VCC) or external power supply (EXT_VCC) of the
digital input. Set with internal power supply (INT_VCC) on
the right and external power supply (EXT_VCC) on the
left.
LAN connector compatible with 1000BASE-
T/100BASE-TX/10BASE-T.
Right side is LAN1 and left side is LAN2.
*1 Only one out of two the connectors of (1) and (2) can be
used. Both cannot be used at the same time.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
