6
Basic Calls & Phone Use
Basic Calls & Phone Use
Making basic calls
You make a simple call in the same way as you would with a normal phone, except that you need to press after entering the area Subscriber Trunk
Dialling (STD) code and the phone number. To make international calls, you must first enter the international dialling code (see page 14).
2
Use the full STD area code even if you are calling to a person in the same town. If the numbers are too long to be displayed within one line, after
pressing
,
excess part is deleted and ‘...’ is added at its end.
2
The main-LCD display shows the strength of the radio signal that links your phone to the network. The maximum signal strength is shown by 4 shaded
blocks and the minimum signal strength by 1 block.
Starting a call
☛
Key in the phone number. Check the number on the display
➔
or
SK1
to send the input number to start the call
☛
Before the other party answers the call, you can end the call by pressing briefly, pressing
SK2
or closing your phone. When you use the
headset, you can also end the call by pressing and holding the button on it.
2
When connecting a wired headset and Bluetooth headset at the same time, the wired headset will not work.
When the call is sent, the screen displays the number called, the name stored in the phonebook and a connection graphic or a Calling Line Identification
(CLI) picture that has been allocated to the number called (see page 50).
Correcting mistakes
Use the and to move the cursor and then
CLR
to clear individual digits, or hold down
CLR
to completely clear a phone number.
Ending a call
☛
While talking,
SK2
or briefly, or close your phone. The phone returns to the standby screen.
2
If is held down, your phone will turn off.
2
When you use the headset, you can also end a call by pressing and holding the button on it.
2
When connecting a wired headset and Bluetooth headset, the wired headset will not work.
2
You cannot end a call by closing your phone when the headset is connected.
Receiving an incoming call
When someone calls your number, the ringer will play (if set - see page 23), the LED glows in the specified colour, and the phone number of the caller may be
displayed if the calling line identification facility is available and the caller has activated the feature. If the caller’s phone number has been related and stored in
your phonebook with a name and a CLI picture (see page 50), that name and picture will be displayed. If the caller has withheld their identity, the screen will give
a message that the caller’s number is being withheld. If the origin of the call cannot be determined, no information is displayed on the screen.
2
You also have options for holding and forwarding calls. These options depend on your network and your subscription arrangements.
▼
▼
Содержание e540
Страница 14: ...Memo ...
