NEC E463, Руководство пользователя

Страница: 19 / 34

English-17 English-16
English
RS-232C Port Specifications
PC control of the Display
Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub
RS-232C for the connections�
Note: This operation system should be used by a person who is accustomed to using
computers�
Communication conditions
Set the RS-232C communication settings on the PC to match the display's
communication conditions�
The display's communication settings are as follows:
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
Stop bit: 1 bit
Communication procedure
Send the control commands from the PC via the RS- 232C connector�
The display operates according to the received command and sends a response
message to the PC�
Do not send multiple commands at the same time� Wait until the PC receives the
response before sending the next command�
Power Mode Status
Mode LED Status
On None
Standby Red
Warming
up
Blinking Red
Power saving support automatically power on when signal appear�
Standby to power on by touch up remote or keypad power button�