NEC Dterm PSIII, Руководство пользователя

Страница: 68 / 74

3-54 Using the PSIII
Dterm PSIII User Guide - Revision 1
Figure 3-75 Reset All Confirmation dialog box
Step 4
Press the FNC key to confirm. An Execute dialog box displays
(Figure 3-76) .
Figure 3-76 Execute dialog box
Step 5
Press the FNC key to confirm. A confirmation screen displays.
Step 6
Press the FNC key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Access Soft Keys
The following is an example of soft key codes (when they have been
programmed).
Step 1
Press FNC+4 . A Soft Key dialog box displays (Figure 3-77) .
Figure 3-77 Soft Key dialog box
Step 2
Select the soft key by using the Scroll T or Scroll S keys.
Step 3
Press the FNC key or the number to confirm. A Pick dialog box displays
(Figure 3-78) .
Reset All?
Execute?
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Soft Key
[1]PICK
[2]PARK
[3]CAMP