NEC Dterm PSIII, Руководство пользователя

Страница: 51 / 74

Using the PSIII 3-37
Dterm PSIII User Guide - Revision 1
To Set Call Forwarding - Don’t Answer Access Code
Step 1
Press FNC+3+5+2 . A Call Forwarding - Don’t Answer dialog box
displays (Figure 3-45) .
Figure 3-45 Call Forwarding - Don’t Answer dialog box
Step 2
Press the FNC key or 1 . For Mode 2* systems, a Call Forwarding - Don’t
Answer Access Code dialog box displays (Figure 3-46) .
Figure 3-46 Call Forwarding - Don’t Answer Access Code dialog box
Step 3
Type in the access code to establish call forwarding when a call is not
answered.
Example:
*4=Call Forwarding - Don’t Answer, Set.
Step 4
Press the FNC key to enter.
Step 5
Press the FNC key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Cancel Call Forwarding - Don’t Answer
Step 6
Press FNC+3+5+2 . A Call Forwarding - Don’t Answer dialog box
displays (Figure 3-45) .
Step 7
Press the FNC key or 2 . For Mode 2* systems, a Set Call Forwarding -
Don’t Answer Access Code dialog box displays (Figure 3-46) .
Step 8
Type in the access code to cancel Call Forwarding - Don’t Answer.
Example:
#4=Call Forwarding - Don’t Answer, Cancel.
[1]Set
[2]Reset
CFW D/A
Access No?
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.