NEC Dterm Cordless II DTR-4R BK, Руководство пользователя

Страница: 8 / 15

5
Ringer ON/OFF Slide Switch
When the ringer ON/OFF slide switch (located at side of handset) is turned off, the handset does
not ring or vibrate and the ringer ‘OFF’ icon appears in the display. When the ring ‘OFF’ icon
appears and the terminal is idle for five minutes, the ring ‘OFF’ icon turns off to save battery life.
When operation resumes, the ring ‘OFF’ icon reappears.
Vibrator Mode
If the ring tone selection is ‘Ring OFF’ when the slide switch is on and the handset is not on the
charger, the handset vibrates when there is an incoming call.
If the handset is on the charger and ring tone selection is ‘Ring OFF’, the handset rings as ‘Ring
Type-A Low’.
Ring Tone/Volume Setting Table
The following table shows how the handset rings in each setting.
Desk/Cordless Switching
When the D
term
Cordless II is associated with a multiline telephone, the base unit can be used for
switching between Cordless and Desk modes.
Press Cordless to select D
term
Cordless II mode.
- OR -
Press Desk to select multiline telephone mode.
!
The REDIAL key can be used to switch from Desk to Cordless mode only. At default, the
REDIAL key can only perform the redial function.
Ringer Settings On Charger Off Charger
Ringer Slide Switch Off Nothing Nothing
Ringer Slide Switch On:
High Tone On Selected Ring High Selected Ring High
Low Tone On Selected Ring Low Selected Ring Low
High/Low Tone/Ring Off Nothing Nothing
Ring Off – Vibrate Ring Tone – A Low Vibrate