TERMINAL SETUP
22
6.
Select a desired calendar format.
No. Calendar 12 hour clock
1
Type1
MON 3 JUN 2019 3:13 PM
2
Type2
3 JUN MON 3:13 PM
3
Type3
JUN 3 MON 3:13 PM
4
Type4
6- 3 MON 3:13 PM
5
Type5
MON 3 JUN 3:13 PM
No. Calendar 24 hour clock
1
Type1
MON 3 JUN 2019 15:13
2
Type2
3 JUN MON 15:13
3
Type3
JUN 3 MON 15:13
4
Type4
6- 3 MON 15:13
5
Type5
MON 3 JUN 15:13
TO SET TIME FORMAT
Following explains how to set the time format for
display indicate.
1.
Display the Menu
screen, and select “Settings”
2.
Select “ 1
User Settings
”.
3.
Select “ 3
Display”
4.
Select “ 1
Calendar format”.
5.
Select “ 2
Time
format”.
6.
Select a 12 hour or 24 hour indicate.
If the “ 0 Automatic” is selected,
Indication depends on the system data
setting. For details, please contact the
system administrator.
TO ENABLE/DISABLE VOLUME
LEVEL DISPLAY
Determines whether or not to display the
following volume levels: handset receiver volume,
speaker volume, ringer tone volume and LCD
contrast volume.
1.
Display the Menu
screen, and select “Settings”
2.
Select “ 1
User Settings
”.
3.
Select “ 3
Display”
4.
Select “ 2
Local Volume”.
5.
Select whether to display the volume level.
If it is set to “ 0 Automatic”, the
“ 2 Enable” is applied.
TO SET SCREEN SAVER
To set whether starting the Screen Saver when
the terminal is idle for a certain period of time.
1.
Display the Menu
screen, and select “Settings”
2.
Select “ 1
User Settings
”.
3.
Select “ 3
Display”
4.
Select “ 3
Screen Saver”.
5.
Select “ 1
Screen Saver Mode”.
6.
Select whether to Enable/Disable the Screen
Saver.
7.
Select “ 2
Wait Time
”.
8.
Enter the Wait Time.
This terminal has a screen saver
enabled by default. If you disabled the
screen saver and the same screen is
displayed for a long time, an
afterimage may appear on the display,
but this is not a malfunction. The
afterimage is gradually eliminated by
changing the screen display. However,
if the same screen is displayed for too
long, the afterimage will not disappear,
so keep the screen saver enabled.
