NEC DT820 ITY-6D, Руководство пользователя

Страница: 50 / 234

I N S TA L L AT I O N
3 -30
DT820 Phone User Guide
Figure 3.6 Handset Connection
To connect LAN cable to the phone
You will need a 10 BASE-T/100 BASE-T/TX LAN cable (Straight) to connect the
phone to your network.
1
Connect the 10 BASE-T/100 BASE-T/TX LAN cable to the LAN port on the phone and to
an open port on a device such as a Hub or PoE (Power Over Ethernet) switch on the
local area network.
2
Thread the LAN cable through the groove on the bottom of the tilt leg.
Figure 3.7 Phone/LAN Connection
To connect a headset (Optional)
Note:
For information on connecting a Jabra Bluetooth headset to your phone, see
Appendix C , “EHS Bluetooth® Headset Support.”
1
Press the Menu key on the phone.
2
Select
3
User Settings.
3
Select
2
Headset.
4
Select
1
Enable/Disable.
5
Select
2
Enable.
6
Press Enter
b
on the cursor pad or the OK softkey to accept the setting.
7
Insert the headset cord plug into the HEADSET connector on the back of the phone, until
you hear a click.