
12
Installing And Using a Headset
To install an optional headset:
1.
Plug the headset cord into the headset jack on the
bottom of the telephone.
2.
The headset cord routes through the upper channel on
the right side of the telephone base.
To set up a headset Feature Key:
1.
Dial
#KP (#57
).
2.
Press the Feature Key you want to
HOLD
.
3.
Press
INTERCOM
.
–
INTERCOM
flashes (red).
4.
Press a
VOLUME
key until you see
HEADSET
.
5.
Press
HOLD
+
SPEAKER
twice to exit.
To turn the headset mode on and off:
1.
Press your Headset Feature Key.
– The headset key is on while in the headset mode; off while in the normal handset mode.
– You can optionally dial
#HS
to turn the headset mode on and off.
To use your headset:
1.
While in the headset mode, you can do the following:
– Press a line key to place or answer an outside call.
– Press
INTERCOM
to dial a co-worker on the Intercom.
– While on a call, press
SPEAKER
to hang up.
2.
Keeping the above three things in mind, process calls normally using the convenience of a headset.
1093065_rev1-04.qxd 11/7/06 3:01 PM Page 12