NEC DLP Cinema NC3200S, Руководство пользователя

Страница: 10 / 70

10
1. What’s in the Box? and the Names of the Projector Parts
1-3. Names of the Projector Parts
1-3-1. Front of the Projector
1
2
3
4
5
LAM
P
MEN
U
ENTE
R
DOUS
ER
KEY
LOC
K
EXIT
IMB
6
7
8
1
2
3
5
6
7
4
8
12
10
11
13
14
15
16
9
13
1. Air outlet (for cooling the lamp)
Connects to an exhaust device to exhaust heat from the lamp. Please contact your dealer/distributor to install the exhaust
device.
2. Air outlet
The outlet for the heated air in the projector. Do not cover.
3. Control panel
On the control panel, power to your projector is turned on or off, titles are selected, and various adjustments are made of
projected screen. (See page 15)
4. Lamp power cable
This is the power cable that connects with the lamp power supply. Request your dealer/distributor to connect/disconnect
the power cable.
5. Connection terminals
Various image signal cable are to be connected here. (See page 14)
You can expand signal input terminals by installing the optional media block or internal multi-media switcher (MM3000B).
Contact your dealer/distributor for more information on the media block and MM3000B.
6. Main power switch
While AC power is being supplied, set the main power switch to ON, then your projector will enter a standby state.
7. Ethernet port
The connector for external devices such as a cinema server or a PC installed with the DCC. (See page 14)
8. Buzzer
The buzzer rings when the power is turned on or an error has occurred.