NEC Display Wall Calibrator 1.0.00 страница 46 Скачать руководство пользователя | Manualshive

Страница: 46 / 57

background image

| NEC Display Wall Calibrator - UsEr’s GUiDE

1. Install Software

Install the

NEC Display Wall Calibrator

software on the host PC. The serial number provided on either the CD-ROM

cover, or with your purchase will be required to install the software.

2. Connect color sensor

Connect the color sensor to a USB port on the host PC and verify the drivers are installed correctly.

3. Warm up displays

Power-on each of the displays in the video wall. The displays should be warmed up for at least 30 minutes before

calibrating.

4. Configure and connect displays

It is not necessary to connect the video output from the PC to any of the displays. The only connection to the

displays will be either RS232 and/or LAN (Ethernet). Wireless LAN can also be used from the host PC if using a

wireless access point or router.

See chapter 3 for detailed information about the various connection configurations.

5. Define Video Wall Layout and Connections

Use the “Layout Wizard” from the Edit menu to specify the number of displays, their layout, calibration order, and

connection method.
If necessary modify the connection settings for any display by using the

Connection

panel.

6. Verify Communications

Test the communications to all the displays by clicking the

Verify All

button on the

Actions

panel. This will attempt to

communicate with each display in the layout.
If there is an error in verifying communications with a display, see the troubleshooting guide in chapter 7:
As each display is successfully tested, it’s rectangle in the main window will change from Yellow to Cyan. Once all

displays are verified, it is possible to continue on with the next stage of the calibration process.

7. Initialize Display Settings

Click the

Initialize All

button on the

Actions

panel to reset the color settings on each display to the default state.

8. Measure displays with default settings

If

Maximum Possible Matching

is selected as the

Intensity

adjustment method in the current

Calibration Target

, it

5

Quick start to NEC Display Wall Calibrator

«
...
44
45
46
47
48
...
»

Содержание Display Wall Calibrator 1.0.00


























































Отзывы:

Нет отзывов

Похожие инструкции для Display Wall Calibrator 1.0.00

Бренд: Canon Страницы: 2

Pixma Pro9500 Series

Бренд: Canon Страницы: 31

PowerShot SD430 DIGITAL ELPH WIRELESS

Бренд: Canon Страницы: 130

PowerShot SD880 IS Digital ELPH

Бренд: Canon Страницы: 83

Бренд: Canon Страницы: 34

N1240U - CanoScan Flatbed Scanner

Бренд: Canon Страницы: 109

Jetstream CPX-1000

Бренд: Paradyne Страницы: 93

DISK DIRECTOR SUITE 10

Бренд: ACRONIS Страницы: 127

ALTIRIS 6 INVENTORY SOLUTION

Бренд: Symantec Страницы: 2

NETWORK BASIC - USER REFERENCE GUIDE 3.2

Бренд: Red Hat Страницы: 76

Бренд: Epson Страницы: 22

Message Broadcasting

Бренд: Epson Страницы: 9

Бренд: Epson Страницы: 4

LQ-860 - Impact Printer

Бренд: Epson Страницы: 8

Бренд: Epson Страницы: 4

C300011B - Stylus Pro 5500 Color Inkjet Printer

Бренд: Epson Страницы: 11

LQ Color driver

Бренд: Epson Страницы: 11

Photo File Uploader3

Бренд: Epson Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды