NEC Display Wall Calibrator 1.0.00 страница 36 Скачать руководство пользователя

Страница: 36 / 57

| NEC Display Wall Calibrator - UsEr’s GUiDE

This panel is used to modify the communications connection

settings for the currently selected display in the layout.
Connection types of

RS232

LAN

(Ethernet) can be

selected.
Is using RS232, the RS232 COM port on the host PC used

to communicate with the displays can be selected. Currently

available COM ports on the host PC are listed in

COM Port:

Otherwise, if using LAN, the

IP Address

of the display can be

entered. See Chapter 8 for instructions on how to assign the

IP address for each display.
For both communications types, the

Monitor ID

of the display

must be selected and this must match the ID selected on the

display’s OSD setting. If displays are daisy-chained together

using RS232, each display must have a unique Monitor ID

assigned that must match that set on the display’s OSD setting.
The communications settings and link to the display can be tested by clicking the

Test

button. This will attempt

to communicate with the display on the selected communications interface and Monitor ID.
Clicking the

Update

button will update the communications connection settings for the currently selected display

in the layout.

Note:

If changes have been made, but the

Update

button has not been clicked, then the changes will be lost if

another display is selected in the layout.

Connection panel

This panel shows the Calibration Target settings that will be

used when the displays are calibrated.

The Calibration Target settings can be modified by clicking

Edit...

which will open the

Edit Calibration Target

dialog.

White Point

shows the Target White Point.

Gamma

shows the Target gamma or Tone Response Curve

type.

Intensity

shows the Target display intensity adjustment

method and value.

Note:

When using the

Maximum Possible Matching

method

for Intensity, the actual value used to calibrate all of the

displays will not be shown until all of the displays have been

measured, and the Target calculated.

Contrast Ratio

shows the Target contrast ratio.

Calibration Target panel

Содержание Display Wall Calibrator 1.0.00

























































Результаты поиска

Содержание Display Wall Calibrator 1.0.00

Отзывы:

Похожие инструкции для Display Wall Calibrator 1.0.00

Бренды по названию

Популярные бренды

NEC Display Wall Calibrator 1.0.00, Руководство пользователя

Результаты поиска

Содержание Display Wall Calibrator 1.0.00

Отзывы:

Похожие инструкции для Display Wall Calibrator 1.0.00

Бренды по названию

Популярные бренды