NEC Display Wall Calibrator 1.0.00, Руководство пользователя

Страница: 43 / 57

NEC Display Wall Calibrator - UsEr’s GUiDE |
The Calibration tab is used to apply the various calibration settings
to video inputs other than the input that was selected when the
display was calibrated.
Each video input can have its own settings for various controls,
such as Brightness, Gamma Selection, Picture Mode etc.
During calibration, the settings for the currently selected video
input are automatically configured. However if at some point in time
other types of video inputs will be used with the video wall, then
the settings for those inputs will need to be correctly configured to
use the calibrated settings.
Select the video inputs to apply the calibrated settings to and click
the Apply button.
Display Settings dialog - Calibration tab
The Status tab reports various aspects about the currently
selected display. This feature is not available when All Displays
is selected.
Operating Hours - Shows the number of hours that the currently
selected display has been in operation.
Fan 1, 2, and 3 - Shows the current operating status of the
internal cooling fans of the display. On, Off and Error conditions
are reported.
Temperature Sensor 1, 2, and 3 - Shows the current internal
temperature sensor readings of the display.
Diagnostics - Shows the diagnostic condition reported by the
display, as well as various failure conditions such as power supply,
fan, and temperature abnormalities.
Display Settings dialog - Status tab