NEC DIRECTION SP B - SERVICE 1999, Инструкция по обслуживанию и справочник

Страница: 34 / 146

2-12 Utilities
Resource Configuration Submenu
This option allows you to reserve specific resources for use by legacy ISA
devices. To enter the submenu, highlight this field, then press
Enter . The
following options are displayed:
„
Memory Reservation Submenu
This option lets you configure memory blocks for use by legacy ISA
devices. When selected, the submenu displays a list of addresses from
which specific addresses can be selected. Use the arrow (cursor) keys to
highlight an upper memory block, then press
Enter
. Select “Available”
(default) or “Reserved” with the cursor keys, then press
Enter
to change
the setting.
To return to the Resource Configuration submenu, press
Esc
.
„
IRQ Reservation Submenu
This option lets you reserve specific IRQs (interrupt requests) for use by
legacy ISA devices. To do so, highlight this field, then press
Enter
. Use
the arrow (cursor) keys to highlight the specified IRQ, then press Enter .
Select “Available” (default) or “Reserved” with the arrow keys, then
press
Enter to change the setting.
!
CAUTION
An asterisk symbol appearing next to an option indicates
that the selected IRQ is set to conflict with another device.
To return to the Advanced Menu, press Esc twice. Then press the right arrow
(cursor) key to move to the Security Menu.
Security Menu
The Security Menu can be used to set a user password and/or an administrator
password.
A User Password controls access to the system and Setup Utility program at
boot up. If the User Password feature has been enabled, you need to enter your
User password correctly whenever you boot the system before you can use it.
An Administrator Password controls access to the BIOS and Setup Utility
program. If the Administrator Password feature has been enabled, an
Administrator password must be entered correctly before all options in the Setup
Utility program are available (for example, to disable password protection).
The Unattended Start feature allows the system to boot up and run but the
keyboard and mouse are both locked. You must enter the User Password to use
the keyboard and mouse.
Press the right arrow (cursor) key to move to the Power Menu.