55
NEC D3-10i Quick Start Guide
55
6. At the iSCSI Setup Wizard Welcome screen,
click
Next
to begin the logical disk binding
wizard.
7. At the Set the LD Set window, you can specify
which platform the logical disk set will be used
with, establish a name for the set, configure
CHAP authentication settings for the set, and
configure access restrictions for each portal.
When all required settings have been configured,
click
Next
to continue.
8. The Set initiators window allows you to assign
host initiators to the logical disk set. Select the
initiator(s) that this logical disk set will be
assigned to from the lower
Assignable
Initiators
window, and then click
Add
to assign
that initiator to the logical disk set. Or, if the
initiator is not automatically detected, you can
manually enter the initiator details by using the
Type In/Edit
button.
When all initiators have been assigned to the
logical disk set, click
Next
to continue.
