manualshive.com logo in svg

NEC 124i Enhanced, Руководство пользователя

Поделиться
Скачать
NEC 124i Enhanced Скачать руководство пользователя страница 67

0401- System Options, Part A

Description

Use Program 0401 - System Options (Part A) to set various
Hotel/Motel options. For the 384i, this program sets options for each
Tenant Group. You can set the options differently for each of the four
Tenant Groups. Refer to the following chart for a description of each
option, its range and default setting. Also refer to Program 0402 -
System Options (Part B).

Conditions
None

Default Setting
Refer to the chart below.

System Options (Part A), Program 0401

Feature Cross Reference

Wake Up Call

Telephone Programming Instructions

To enter data for Program 0401 (System Options 
[Part A], Item 28: Hotel Wake Up Call No Answer Mode):
1. Enter the programming mode.
2. 0401 + HOLD.

Tenant No?

3. Enter the number of the Tenant Group you want to program (1-4)

+ HOLD

Item No?

4. Enter 28 + HOLD

Item_28:

The previously programmed value displays.

5. Enter data (0 or 1 - see above) + HOLD

Item No?

6. HOLD to program this item for another Tenant Group

OR

HOLD + HOLD to exit.

0 (Music
on Hold)

0 = Unanswered

Wake Up calls

will not ring the

operator.

1 = Unanswered

Wake Up Calls

automatically

ring the operator.

Wake Up

Call

Hotel Wake Up Call No
Answer Mode
If enabled (1), unanswered
Wake Up Calls will auto-
matically ring the operator.
If disabled (0), unanswered
Wake Up Calls will not
ring the operator.

28

Default

Range

Feature

Description

Item

3-9

3. Programming the 

Hotel/Motel Options

92000hmt06.QXD  4/24/01  10:12 AM  Page 9

Содержание 124i Enhanced









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды