13
z
Adjust heating power
Sliding touch the power and timer setting range to increase or decrease the heating
power.
z
Setting timer
Touching timer display
to set timer for selected cooking zone.
z
Adjust timer setting
Sliding touch the power and timer setting range, or touch
to increase or
decrease timer setting.
Touch
for 3 seconds will lock control panel, and retouch
for 3
seconds will unlock control panel.
5
．
Choosing the Right Cookware
Important!
Only use cookware with a base suitable for induction cooking.
Look for the induction symbol on the packaging or the bottom of the pan.
You can check whether your cookware is suitable by carrying out a magnet test.
Move a magnet towards the base of the pan. If it is attracted, the pan is suitable for
induction.
If you do not have a magnet:
Put some water in the pan you want to check.
Follow the steps under
‘
To start cooking
’
opposite.
If does not flash
in the display and the water is heating, the pan is suitable.
Cookware made from the following materials is not suitable: pure stainless steel,
aluminum or copper without a magnetic base, glass, wood, porcelain, ceramic,
earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the
same size as the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the cooktop
–
do not slide, or they may scratch the glass.
6
．
Cooking Guidelines
Important!
Never leave the appliance unattended when in use. Boilover causes smoking and greasy
spillovers that may ignite.
Take care when deep-frying: oil or fat can overheat very quickly, particularly on a high
setting.
General Cooking Tips
1.
Using a lid will reduce cooking times through retaining the heat.
2.
Minimise the amount of liquid or fat to reduce cooking times.
3.
Start cooking on a high setting and reduce it when the food has come to the boil or
heated through.
7
．
Care and Cleaning
What?
Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers
on the glass)
How?
1、
Switch the power to the
cooktop off at the wall.
2、
Apply cooktop cleaner while the glass is still warm (but not hot!)
3.
Rinse and wipe dry with a clean cloth or paper towel.
4.
Switch the power to the cooktop back on at the wall.