11
Cleaning and Maintenance
Note should cut off the power before to clean and maintaining of the projector. Do not
use the projector if the lens is damaged, such as crack or scratch and so on, make sure
to keep its normal functions
Users should keep taking a full testing for the light security & installation every year by
an empirical person and each four years by the specialist.
When make the testing, should consider the following:
1. the screws, bolts of this projector should be locked, and not corrupted
2. Should not any deformation at the case. Fixing or installation’s joining(including the
ceiling ,lantern support and so on)
3. The accessory of mechanical such as axle, rocker must not allow to be wearing, and
also no unbalanced rotation.
4. the power cable should not be damaged, cracked and so on, if so, should change a new
one
The lens and fan should be cleaned one time each month, to make sure its function
Gobo flat, gobo wheel should be cleaned one time each month by soft brush
Soft cloth and typical glass cleaning products should be used for cleaning, do not use
any organic solvent, e.g. alcohol.
To keep the rotation smoothly, suggest putting some lubricating oil to gobo wheel each
three months, the quantity of lubricating oil should be less, avoid spilling over.
Color wheel, color flat, and the inter lens of the projector should be cleaned one time
each month
There are not user serviceable parts inside the projector except the lamp and fuse.
Pls uses the same model and standards fuse when replace it
Only the authorized distributor can maintain and service the projector
If in need of any accessories, pls get it from the original factory.
Please ask advice in case of doubts
