NEBO PINNACLE 2400, Руководство по эксплуатации

Страница: 16 / 22

— 16 —
RE-CHARGING:
Use the original AC cable to charge, the full charge time is about 1.8-2.8 hours.
When charging, the LCD screen will be lit, the LCD display will provide real-time
display data of battery charging, and the device will display 100% when
it is fully charged. It is recommended to fully charge the device every
3 months to maintain the life of the device.
OUTPUT PORTS:
While the power station is powered on, press the power button for the
corresponding ports to enable the output(s), an icon will also be lit on the
display.
OVERLOAD CONDITION:
When the output port(s) are short-circuited, the error code "E07" will display
on the screen, and the output ports will shut off. Disconnect the devices and
check for shorts.
When the output port(s) are overloaded, the error code "E08" will display on
the screen and the output ports will shut off. Disconnect the loads.
POWER ON/OFF:
Long press the power ON/OFF button for 2-3 seconds to turn the power
station on or off. The power station must be powered on before enabling
output ports.
COOLING FAN:
The equipment is designed with internal fans to ensure that the product runs
within the proper temperature range. When the device is working hard, it will
automatically turn on the fan. During discharging and charging, the fan may
run intermittently to keep the internal temperature within the operating
range. When the AC circuit is activated, the fan is likely to start to ensure
normal operation.
POWER SAVING SLEEP MODE:
When the power station is not plugged in to the wall outlet, and no output
ports are enabled, it will enter sleep mode in 5-8 minutes.
When the unit is fully charged, the LCD will display the battery level at 100%
and input power is 0W. The LCD will turn off automatically.
If the output ports are ON and the power is lower than certain level, the device
will turn OFF all outputs then enter sleep mode in 8 hours.
(USB<5W, DC<5W, AC<25W)
OPERATING INSTRUCTIONS