NEBO PINNACLE 2400, Руководство по эксплуатации

Страница: 14 / 22

— 14 —
CHARGING
CHARGING WITH A SOLAR PANEL (SOLD SEPARATELY):
1. Connect the DC5525 to Anderson cable.
2. When fully charged, the input watts will display 0 and the Digital
Display will indicate 100%. (Full charge could take up to 8 hours*)
3. Disconnect cable and power off your Pinnacle 2400.
USING THE 120V AC OUTPUT PORTS:
The NEBO Pinnacle 2400 can be used to power your 120V AC electronic
devices/equipment/appliances rated for 2400 watts or less.
1. Connect the AC power plug from your electronic device, equipment
or appliance into any of the four AC Output Ports.
2. Long press the POWER ON/OFF button to turn on the power station,
then press the AC ON/OFF button to begin charging or powering.
3. When done, simply press the AC ON/OFF Button and remove the
plug from the Pinnacle 2400.
NOTE: The NEBO Pinnacle 2400 will provide up to 4800 watts surge power
for a short duration.
NOTE: Charging speed will vary based on a number of factors including weather,
obstructions and solar panel angle and positioning.
*Charge time achieved using four NEBO 100W Solar Panels.
DC to Anderson
Power Cord
(Included)
POWERING YOUR ELECTRONIC DEVICES,
EQUIPMENT AND APPLIANCES