- 5 -
Bendy Arm
Clip in flexible tubing.
Bend to a convenient
position for the user. AVOID
SHARP BENDS and DO NOT
pull hard on the bendy arm
as this can damage it.
Operation
1.
Push and hold the external switch until the unit starts to pump.
2.
The amount of liquid pumped depends upon the programme number selected.
3.
There is then a waiting period during which the unit will not pump again.
The unit will not pump again if the switch has been held continuously
–
you have to release and push
again.
The programming is designed to minimise the risk of pumping too much liquid at one time.
Nevertheless, there is always a risk of choking and it is strongly recommended that the device should
only be used if it has been assessed as safe to use for each individual by a Speech and Language
Therapist.
External Switch
The standard switch is
very light and can be
positioned wherever
convenient; perhaps
with Velcro
Cleaning
•
Always rinse flexible tubing out and clean before use and immediately after use.
•
Use sterilising solution and rinse thoroughly.
•
If puréed food or thickened drinks have been pumped, water must be pumped through using the unit
itself in pump priming mode immediately afterwards to clear the tubing before cleaning.
•
A Tube Cleaning Brush is available (ND-SC)
•
Other parts of the unit can be wiped clean; rinsing off any detergent used.
•
Some chemicals may attack the plastic casing.
•
Do not immerse the unit in water.
Disposal
–
RoHS and WEEE
This equipment is exempt from the RoHS directive (as medical devices) as long as it is used to assist people
with disabilities. Under the WEEE directive it should not be disposed of in the normal waste stream but be
placed with separate collection for electrical and electronic equipment (or returned to Neater Solutions
Limited). Producer Registration Number: WEE/GB0074UR/PRO
Содержание Powered Drinker
Страница 6: ...6...
