Neater Powered Drinker, Инструкция по эксплуатации

Страница: 4 / 6

- 4 -
to user’s mouth
• Load the flexible tubing as shown
• Tuck the tubing (drink container end) behind the peg (stops slipping)
•
Push the lever down to clamp the tube
(Only use precision tubing supplied by Neater Solutions
– SIL60-4.8x1.6 platinum-cured)
• Ensure tubing sits in the bottom of
the container to ensure no air
bubbles.
•
If the motor runs but liquid is not
pumped, try swapping which end of
the straw is in the cup and which
end is at the user's mouth!
A calibrated container can be used
to monitor fluid intake.
Puréed food or thickened drinks of a custard consistency can be pumped.
Water must be pumped through using the unit itself in pump priming mode immediately afterwards to clear
the tubing before cleaning.
Take care to avoid spillages into the pump. To remove the straw, lift it out rather than pulling it through the
pump.
from
container
to
mouth