NDW
| We’ll keep you rolling | 13
NDW
| We’ll keep you rolling | 14
2KV 9 mm
spring loaded
2KV 13 mm
TRANSPORT AND STORAGE
2KV 9mm
springloaded
2KV 13mm
PRODUCT INFORMATION
Ambient conditions for transport
Ambient conditions for storage
Transport
Each NDW 50/60 DRX is separately packaged in
cardboard boxes. The transport of the NDW 50/60
DRX must be executed by qualified personnel
only. A risk of injury persists when transporting the
product incorrectly. The instructions below must be
followed during transport at all times:
• Not more than four boxes can be stacked on top
of each other. This is due to the risk of tipping over
stacked boxes, potentially resulting in a damaged
product.
• Before transportation, make sure that each box is
properly fixed.
• Every package should be checked for damage
and completeness.
While storing the NDW 50/60 DRXs, ensure
no more than four boxes are stacked on top of
each other, as this may result to tipping over and
possibly damaging the product. When a NDW
50/60 DRX is taken out of storage, please inspect
for damage prior to usage.
• Impacts to the product must be avoided at all
times.
• If any damage occurred during transportation,
you are advised to take photos that will serve
as evidence. Immediately report the damage
to the transport company and NDW Otherwise
compensation cannot be guaranteed.
• Prevent serious temperature fluctuations while
transporting the NDW 50/60 DRX, since this may
lead to condensation, causing serious damage to
the product.
Permissible ambient temperature
-20°C to 60°C (-4°F to 140°F)
Permissible relative humidity
5% to 95%
Permissible ambient temperature
-20°C to 60°C (-4°F to 140°F)
Permissible relative humidity
5% to 95%