NDT EVOTIS Скачать руководство пользователя страница 9

- 9 -

Warranty 

The product described herein is warrantied against defects in material, 
design and workmanship for a period of one year from the date of shipment 
from Japan. Warranty does not apply to the consumable parts including 
batteries, charger, and hammer head of the Auto Hammer. 

Subject to the conditions and limitations described below, this product, if 
returned to us with proof of purchase within the stated warranty period, and 
if covered under this warranty, will be repaired or replaced (with the same 
model, or one of equal value or specification) at our option. 

This warranty is subject to the following conditions and limitations: 
A) This warranty will not apply to any product or part thereof that is worn

or broken or that has become inoperative due to abuse, misuse, accidental
damage, neglect or lack of proper installation, operation or maintenance
(as outlined in the operating instructions).

B) This warranty will not apply to normal wear and tear or to expendable

parts or accessories that may be supplied with the product and that are
expected to become inoperative or unusable after a reasonable period of
use.

C) This warranty will not apply where damage is caused by repairs made or

attempted by others (i.e. persons not authorized by the manufacturer).

D) This warranty will not apply to any product or part thereof if any part

from another manufacturer is installed therein or any repairs or
alterations have been made or attempted by unauthorized persons.

E) This warranty will not apply to normal deterioration of the exterior finish,

including but not limited to scratches, dents, chipped paint, or to any
corrosion or discolouring caused by heat, abrasive and/or chemical
cleaners;

Содержание EVOTIS










Отзывы: