- 8 -
Safety Information
1. Follow the battery installation instructions carefully and make sure the
plus and minus poles face the right directions. Use AA Rechargeable
NiMH batteries (in the package). Replace with new batteries when the
Battery lamp turns red.
Stored measured values are kept in memory when the power is turned off.
However, stored measured values will be lost if the battery power runs
out.
2. To avoid misreading test results, the standard value must be reset each
time a different material and/or difference in surface thickness is being
tested.
3. To avoid misreading test results, the surface of the testing subject must be
cleaned before operation.
4. Remove batteries if the EVOTIS is not in use for an extended period.
Care and Cleaning
Clean the surface of the case with an alcohol-based substance. Do NOT use
any other solvents, including, but not limited to:
Alkali or alkaline salt solvents
Amines
Ketones (acetone methyl-ethl-ketone)
Aromatic hydrocarbons (benzene, toluene, exlene)
Esters
Halogen-based solvents (carbon tetrachloride trichlene, dioxane,
methylene-chloride, chloroform)
