Hardness Tester DHT-200
PLUS
11
-Press the
key and the
key to enter
FILES--SETUP NEW FILE,
-Press the
key to enter this item,
-Press the
key or
key for setting,
-Press the
key to confirm.
6.4.2 Storage settings
Set the data auto-saving state during measurement by turning on or off.
When data saving is set on “auto saving”, there will be a corresponding
indication mark
on the screen, and the measuring values will be stored in
the file automatically. Under this condition, the work piece mark can be set to
identify them in the same file, maximum 5 different work piece data can be
saved in one file.
-Press the
key and the
key to enter
FILES--SETUP STORAGE,
-Press the
key to enter this item,
-Press the
key or
key for setting,
-Press the
key to confirm.
6.4.3 Print file settings
Via this function, the saved data in instrument can be printed out. With this
function, users are allowed to print out data in a single file. Before printing,
users need to set the file code, start and end address of data stored.
Keys
and
for setting, key
for
confirmation
Keys
and
for setting
，
key
for
confirmation
Keys
and
for setting
，
key
for
confirmation
