NDS SMARTCHARGER SCS2, Руководство пользователя

Страница: 9 / 20

See the charging curve full description (Page 9).
Follow this steps to start the charge:
1. Connect the SMART CHARGER to the battery (P.5),
then plug the AC power socket. The power status led
will turn on.
2. If everything is ok SMART CHARGER SCS2 will start
charging directly.
7
ICON STATE OF CHARGE
Selection Button - Curve selection and reset during charge
Power status Led
Error Led - short circuit, reverse polarity, bad battery
Rescue mode
Battery is Charging
Full charge / maintenance mode on
Bike battery charging curve
Car battery charging curve
AGM batteries / Cold temperature charging curve
Lithium (LiFePO
4
) battery charging curve
AGM
LITHIUM
LiFePO
4
MODE
NOTE
If the ac power socket is connected before connecting the
clamps to the battery, the error led will be turned on
Connect the clamps to the battery then push the mode selection
button to restart the process.
MODE