NDS ExpandOR, Руководство по установке

Страница: 9 / 52

1
2
This manual is intended to be used by the hospital’s IT department to install and configure the ExpandOR.
A numbered tab on the side of the page denotes the beginning of a section.
The functional descriptions in this manual are representative of:
Part Number:
90T0022
Firmware:
58R0001 Rev A or later
About This Manual
ExpandOR™ is a standalone medical-grade video streaming system that enables video streaming across
existing networks and provides bi-directional or one-way HD video and audio streaming with low latency. The
ExpandOR can transmit a video stream to a single destination, broadcast to selected or all destinations. The
product provides a solution that enables surgeons to conduct bi-directional consultations during surgery,
transmit a video stream to an auditorium for educational purposes, or send sample images to a Pathology lab.
NDS recommends that the initial setup is done in a hospital IT department by a technician with a basic
understanding of networking including an understanding of TCP/IP protocol, IP address, gateway, subnet
mask, network port, pinging a device on the same network, and configuring a laptop to work in a
corporate/hospital network. After initial setup, the IT Department is required to explain the ExpandOR
configuration to the operating room (OR) staff including the following items:

One-way point-to-point

Two-way point-to-point

Multi-Node

Multicast (Broadcast)

Configuration to record incoming or outgoing video
Prior to handoff of the ExpandOR to the OR staff, the IT Department must demonstrate functions of the
ExpandOR Front Panel buttons. The OR Staff will use the Front Panel buttons to operate the unit
during procedures.
Overview
The IP and Port addresses referenced in this manual are for illustration only, and should not be used for
any other purpose.