Technical Information | 17
Display image is
incorrect.
Display position is
incorrect.
Press AUTO/SET to automatically adjust
your display image to the ideal setting. If
the results are unsatisfactory, adjust the
image position using the H position and V
position icon in the on screen display.
Check Control Panel > Display > Settings to
see if the frequency or the resolution were
changed. If yes, readjust the video card to
the recommend resolution
.
On the screen
background, the
vertical bars or stripes
are visible.
Press AUTO/SET to automatically adjust
your display image to the ideal setting. If
the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK
icon in the on screen display.
Horizontal noise
appears in an image,
or characters are not
clearly portrayed.
Press AUTO/SET to automatically adjust
the display image to the ideal setting. If
the results are unsatisfactory, decrease
the horizontal bars using the PHASE icon in
the menu. Check Control Panel > Display >
Settings to adjust the display to the
recommended resolution or adjust the
display image to the ideal setting. Set
the color setting higher than 24 bits
(true color).
The screen color is
mono or abnormal.
Check if the signal cable is properly
connected. Make sure the video card is
properly inserted in the slot. Set the color
setting higher than 24 bits (true color) at
Control Panel > Display > Settings.
The screen blinks.
Check if the screen is set to interlace mode.
If yes, change it to the recommend
resolution. Make sure the power voltage is
high enough. It must be higher than
AC100-240V 50/60Hz.
Problem
Possible Cause
Solution
