NDE Pool MASTER PLUS NDE-08-DCP, Руководство пользователя и обслуживания

Страница: 4 / 34

- 4 -
Thank you for using swimming pool heat pump for your pool heating, it will heat your pool
water and keep a constant temperature when the ambient air temperature is between -15 to
43ºC.
ATTENTION:This manual includes all the necessary information about the use and
the installation of your heat pump.
The installer must read the manual and attentively follow the instructions of implementation
and maintenance.
The installer is responsible for the installation of the product and should follow all the
instructions of the manufacturer and the regulations in application. Incorrect installation against
the manual implies the exclusion of the entire guarantee.
The manufacturer declines any responsibility for the damage caused to people, objects and
for errors due to the installation against the manual. Any use
that isn’t in accordance with the
origin of its manufacturing will be regarded as dangerous.
WARNING
：
Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
The appliance shall be stored in a room without continuously operating ignition sources (for
example: open flames, an operating gas appliance or an operating electric heater.)
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.
Appliance shall be installed, operated and stored in a room with a floor area larger than 20 m2.
NOTE The manufacturer may provide other suitable examples or may provide additional
information about the refrigerant odour.
WARNING:
Please empty the water in heat pump always during winter time or when the
ambient temperature drops below 0ºC or else the Titanium exchanger will be damaged
because of being frozen, in such case, your warranty will be lost.
WARNING: Please always cut the power supply if you want to open the cabinet to reach inside
the heat pump, because there is high voltage electricity inside.
WARNING: Please keep the display controller in a dry area, or close the insulation cover to
protect the display controller from being damaged by humidity.