NDC InstantWave NWH660, Руководство пользователя

Страница: 26 / 53

18 Instant Wave High Speed
Access Point
Another WEP key generation method is by inserting the key values directly from
the keyboard. And click on the write to AP NVRAM. Select the Key number and
use Key for accessing between Access Point and clients. If the Key is not entered
correctly, a client cannot access the resources. As the wireless channel is more
prone to the illegal access, WEP provides users safe access.
IP:
Click the IP tab to open the IP card ( Figure 11 ). All InstantWave Access Points
are delivered with a default IP of 192.168.1.1 and a default subnet mask of
255.255.255.0. If you wish to change the defaults, set each AP to its new IP
address before introducing it to the open network. All APs within the same
network must have the same TCP/IP subnet address.
Figure 11. Configuration/IP
From the IP tab you may view or modify the Access Point ,
configure its subnet mask, or add a default gateway (see the note below).
Note: An AP will transfer SNMP respond packets (confirmation packets) to its
APMS PC directly if it is within the same LAN (the same subnet mask). If a
SNMP respond packet from an AP is destined for an APMS PC on another
LAN, then the SNMP respond packet needs to go through a router-gateway.
The default gateway is the path to that router. If you set the correct default
gateway, then you can use an APMS manager (i.e. the PC running APMS)
physically located in a different subnet to manage this AP.
After making any changes, click the Apply button to make the changes effective
immediately, without closing the dialog box, or click OK to accept the changes and
close the box. Clicking Add to APMS Host Table will add the information to the
host table referred to by the APMS program.