BNC-446
CNC LATHE
OPERATION MANUAL
NCT Ipari Elektronikai Kft.
35/95
Date: 08.10.2015
H-1148 Budapest, Fogarasi út 7.
Tel.: +36 1 467 6300
www.nct.hu
Lifting Part B
3.3.3.
Machine Placing
Before placing the machine, fix the adjusting screws on the base, make the machine as close
as possible to the floor, and position the leveling pads in their most suitable place, so as to
increase the stability of machine.
3.3.4.
Machine Clean & Lubrication
All protective coating must be removed before using machine. Do not attempt to move any
ways if the coating still exists. Be cautions while selecting a suitable cleaning agent. Paraffin
applied with a clean brush will soften the protective coating. The protective coating can then
be removed with clean rags.
NOTICE!
1.
Do not use gasoline or any other flammable solution to clean the machine
2.
Clean and lubricate all the exposed ways of table and saddle. Drive the table & saddle to
one end of travel. Clean and lubricate ways thoroughly then drive table & saddle
to the other end and clean and lubricate ways thoroughly as well. Be sure to use a suitable
lubricant such as Sunoco Way-lube #11180 or Mobil Vactra Oil #2.
3.3.5.
Joy Sticker (option)
The joy sticker will be taken off from panel for shipment when machine fit with joy sticker.
Please follow below instruction to add it back before machine test run.
