BNC-446
CNC LATHE
OPERATION MANUAL
NCT Ipari Elektronikai Kft.
33/95
Date: 08.10.2015
H-1148 Budapest, Fogarasi út 7.
Tel.: +36 1 467 6300
www.nct.hu
Layout
3.2.
Connection of power line
1.
Make sure the voltage of incoming power supply is the right type that the machine
requires or as marked on the unit.
2.
Connect the power wires per electrical code in your area.
3.
Power wires, grounding and over-voltage protector should comply with the local
electricity regulations.
For wiring to other voltages, be sure to rewire the spindle motor, coolant pump, dust suction
device and transformer to correct voltage. The relevant currents, fuses and overload relays are
shown in the electrical manual.
NOTICE!
Do not turn on the machine motor when its voltage is different from power voltage and
contact electric technician for preparation.
3.3.
Unpacking
Remove the top cover of wooden case first and then the plates on four sides. Carefully take
out fittings at first, if necessary. Remove the setscrews used for holding the machine
on the base.
Disassembling packing crate and remove skids as carefully as possible to avoid damaging the
machine. If the machine is damaged during transportation, contact your local dealer, insurance
company and the transportation company who delivered your machine immediately.
3.3.1.
Checking for shortage
Be sure to check your machine against the packing list that is shipped with every machine.
In case of shortages, note items not received and contact your local dealer.
