NCR RealPOS 60, Руководство по обслуживанию оборудования

Страница: 37 / 60

Hardware Disassembly 15
e. Using a small flat ‐ blade screwdriver, turn the ZIFF connector locking screw one
half turn clockwise to lock the CPU.
Note: Make sure the CPU remains flat and fully seated while locking the
socket.
f. Verify the board ʹ s jumper settings match the old Motherboard.
13. Install the Memory Module(s).
14. Install the new Motherboard in the terminal chassis.
15. Connect all of the Motherboard cables.
28761a
CPU Socket Latch
CPU